Home > News > Industry News > What are the issues we need to.....
Certifications
Contact us
Tel: +86-0755-83497810
Email: info@nfctagfactory.com
Contact Now

News

What are the issues we need to know when making rfid smart card?


rfid smart card factory

Now the application of rfid smart card is quite extensive, we often use the entrance guard card, membership card, KTV card, electricity meter card and so on all belong to rfid
smart cards.

Making rfid smart cards we need to know:
1. The cards before the order must indicate the type of chip, the thickness of the card (thick card \ medium thick card \ thin card), the white cards or printed cards.
2. Before the order must confirm the selected chip model can be used normally on its own system. If the chip is improperly selected, resulting in the chip can not be used
normally, the risk is borne by the customer. Therefore, before the order must first test the chip model.
3. Since the chip card is limited to the convex position, please consult our merchandiser to determine the location of the convex code before designing the manuscript.
4. In general, select the domestic chip, the price will be much cheaper than the original chip. Therefore, we advise customers to use domestic chips as much as possible.
5. The standard thickness of the contact chip card is 0.84mm, the thickness of the contactless chip card is 0.90mm-1.10mm.

That's what we need to know about making smart cards. Shenzhen Chuangxinjia is a professional RFID smart card factory. If you want to continue your consultation, you can visit our website and consult our online customer service. Or send inquiry to us.